Perforated Cable Trays

   No Indian Company can beat us on our price   



Description

Cable Tray - Perforated Type  are ideal to install large volume of Heavy duty power cables. Perforation make full  free air rating of cable ,Higher current flow can be achieved  at the same cross section , Over heating and consecutive damaging of cable is avoided ,coupler holes in side guarantees easy connecting of cable trays to each other ,Cable trays can be manufactured in Hot Dip Galvanized Finish(Galvanizing As Per Is-2626),Pre-Galvanized Finish(Material As Per  Is-277),Powder Coating Finish(Powder Coating As Per Is-101),Stainless Steel  Grade-As Per  316 , 304  & In Aluminium-Commercial Grade  Finish.

Height of cable trays is varies from 25,35,50,70,75,100 & 125 mm , Wdth of cable trays is varies from 100 to 1000 mm ,Thickness of cable trays ranging from 10,12,14,16,18 SWG, i.e 3,2.5,2,1.6,1.2 mm

Ask For Technical Drawing (Dwg.No: -UEF-STD-001 & UEF-STD-002)




Description

Horizontal Bend - Perforated Type, are mainly use in combination with perforated type of cable trays to route the cables in 90 degree where two wall are conjoining ,Our product design allows the cable to route properly and chamfer of bend take care of cable not to Worn out , Peel off or Get damage while laying of cables.

Horizontal Bend - Perforated Type, Can Be Manufactured In Hot Dip Galvanized Finish(Galvanizing As Per Is-2626),Pre-Galvanized Finish(Material As Per  Is-277),Powder Coating Finish(Powder Coating As Per Is-101),Stainless Steel  Grade-As Per  316 , 304  & In Aluminium-Commercial Grade  Finish.

Height Of Horizontal Bend - Perforated Type  Is Varies From 25,35,50,70,75,100 & 125 Mm , Width Of Horizontal Bend - Perforated Type Is Varies From 100 To 1000 Mm ,Thickness Of Horizontal Bend - Perforated Type  Ranging From 10,12,14,16,18 Swg, I.E 3,2.5,2,1.6,1.2 Mm

Ask For Technical Drawing (Dwg.No: -UEF-STD-003-D)




Description

‘ T ’ Bend – Perforated Type Is Suitable For Joining Cable Trays In Three Directions At 90 Degree Intervals In The Same Plane. Our Product Design Allows The Cable To Route Properly And Chamfer Of Bend Take Care Of Cable Not To Worn Out , Peel Off Or Get Damage While Laying Of Cables.

‘ T ’ Bend – Perforated Type , Can Be Manufactured In Hot Dip Galvanized Finish(Galvanizing As Per Is-2626),Pre-Galvanized Finish(Material As Per  Is-277),Powder Coating Finish(Powder Coating As Per Is-101),Stainless Steel  Grade-As Per  316 , 304  & In Aluminium-Commercial Grade  Finish.

Height Of ‘ T ’ Bend – Perforated Type Is Varies From 25,35,50,70,75,100 & 125 Mm , Width Of‘ T ’ Bend – Perforated Type  Is Varies From 100 To 1000 Mm ,Thickness Of‘ T ’ Bend – Perforated Type Ranging From 10,12,14,16,18 Swg, I.E 3,2.5,2,1.6,1.2 Mm

Ask For Technical Drawing (Dwg.No:-Uef-STD-004-D)




Description

Cross Bend-Perforated Type Are Mainly Use For Laying The Cable Horizontally Which Allows The Cable To Route From Four End , Our Product Design Allows The Cable To Route Properly And Chamfer Of Bend Take Care Of Cable Not To Worn Out , Peel Off Or Get Damage While Laying Of Cables.

Cross Bend-Perforated Type Can Be Manufactured In Hot Dip Galvanized Finish(Galvanizing As Per Is-2626),Pre-Galvanized Finish(Material As Per Is-277),Powder Coating Finish(Powder Coating As Per Is-101),Stainless Steel Grade-As Per 316 , 304 & In Aluminium-Commercial Grade Finish.

Height Of Cross Bend-Perforated Type Is Varies From 25,35,50,70,75,100 & 125 Mm , Width Of Cross Bend-Perforated Type  Is Varies From 100 To 1000 Mm ,Thickness Of Cross Bend-Perforated Type Ranging From 10,12,14,16,18 Swg, I.E 3,2.5,2,1.6,1.2 Mm

Ask For Technical Drawing (Dwg.No: -UEF-STD-005-D)




Description

Vertical Bend Outside - Perforated Type Are Mainly Use In Combination With Perforated Type Of Cable Trays To Route The Cable Where The The Direction Changes To A Different Plane.

Vertical Bend Outside - Perforated Type Changes Direction Downward From The Horizontal Plane. Our Product Design Allows The Cable To Route Properly And Chamfer Of Bend Take Care Of Cable Not To Worn Out, Peel Off Or Get Damage While Laying Of Cable.

Vertical Bend Outside-Perforated Type Can Be Manufactured In Hot Dip Galvanized Finish(Galvanizing As Per Is-2626),Pre-Galvanized Finish(Material As Per Is-277),Powder Coating Finish(Powder Coating As Per Is-101),Stainless Steel Grade-As Per 316 , 304 & In Aluminium-Commercial Grade Finish.

Height Of Vertical Bend Outside - Perforated Type Is Varies From 25,35,50,70,75,100 & 125 Mm , Width Of Vertical Bend Outside-Perforated Type Is Varies From 100 To 1000 Mm ,Thickness Of  Vertical Bend Outside - Perforated Type Ranging From 10,12,14,16,18 Swg, I.E 3,2.5,2,1.6,1.2 Mm

Ask For Technical Drawing (Dwg.No: -UEF-STD-007-D)




Description

Vertical Bend Inside - Perforated Type Are Mainly Used In Combination With Perforated Type Of Cable Trays To Route The Cable Where The The Direction Changes To A Different Plane.

Vertical Bend  Inside - Perforated Type Changes Direction Upward From The Horizontal Plane .Our Product Design Allows The Cable To Route Properly And Chamfer Of Bend Take Care Of Cable Not To Worn Out , Peel Off Or Get Damage While Laying Of Cable.

Vertical Bend Inside - Perforated TypeCan Be Manufactured In Hot Dip Galvanized Finish(Galvanizing As Per Is-2626),Pre-Galvanized Finish(Material As Per  Is-277),Powder Coating Finish(Powder Coating As Per Is-101),Stainless Steel  Grade-As Per  316 , 304  & In Aluminium-Commercial Grade  Finish.

Height Of Vertical Bend Inside - Perforated Type Is Varies From 25,35,50,70,75,100 & 125 Mm , Width Of Vertical Bend Inside - Perforated Type Is Varies From 100 To 1000 Mm ,Thickness OfVertical Bend Inside - Perforated Type Ranging From 10,12,14,16,18 Swg, I.E 3,2.5,2,1.6,1.2 Mm

Ask For Technical Drawing (Dwg.No: -UEF-STD-008-D)




Description

Reducer Central - Perforated Type Are Mainly Used In Combination With Perforated Type Of Cable Trays To Route The Cable Where Cable Tray Is Suitable For Joining Cable Trays Of Different Widths In The Same Plane. Reducer Central - Perforated Type Has Two Symmetrical Offset Sides .

Our Product Design Allows The Cable To Route Properly And Chamfer Of Bend Take Care Of Cable Not To Worn Out,Peel Off Or Get Damage While Laying Of Cable.

Reducer Central-Perforated Type Can Be Manufactured In Hot Dip Galvanized Finish(Galvanizing As Per Is-2626),Pre-Galvanized Finish(Material As Per  Is-277),Powder Coating Finish(Powder Coating As Per Is-101),Stainless Steel  Grade-As Per  316 , 304  & In Aluminium-Commercial Grade  Finish.

Height Of Reducer Central - Perforated Type Is Varies From 25,35,50,70,75,100 & 125 Mm , Width Of  Reducer Central - Perforated TypeIs Varies From 100 To 1000 Mm ,Thickness Of Reducer Central - Perforated Type Ranging From 10,12,14,16,18 Swg, I.E 3,2.5,2,1.6,1.2 Mm

Ask For Technical Drawing (Dwg.No: -UEF-STD-009)




Description

Reducer Left Hand-Perforated Type Are Mainly Used In Combination With Perforated Type Of Cable Trays To Route The Cable Which Is Suitable For Joining Cable Trays Of Different Widths In The Same Plane. A Reducer Left Hand-Perforated Type, When Viewed From The Large End, Has A Straight Side On The Left.

Our Product Design Allows The Cable To Route Properly And Chamfer Of Bend Take Care Of Cable Not To Worn Out,Peel Off Or Get Damage While Laying Of Cable.

Reducer Left Hand - Perforated Type Can Be Manufactured In Hot Dip Galvanized Finish(Galvanizing As Per Is-2626),Pre-Galvanized Finish(Material As Per Is-277),Powder Coating Finish(Powder Coating As Per Is-101),Stainless Steel Grade-As Per 316 , 304 & In Aluminium-Commercial Grade Finish.

Height Of Reducer Left Hand - Perforated Type Is Varies From 25,35,50,70,75,100 & 125 Mm ,Width Of Reducer Left Hand - Perforated Type Is Varies From 100 To 1000 Mm ,Thickness Of Reducer Left Hand-Perforated Type Ranging From 10,12,14,16,18 Swg, I.E 3,2.5,2,1.6,1.2 Mm

Ask For Technical Drawing (Dwg.No: -UEF-STD-010)




Description

Reducer Right Hand - Perforated Type Are Mainly Used In Combination With Perforated Type Of Cable Trays To Route The Cable Which Is Suitable For Joining Cable Trays Of Different Widths In The Same Plane. A Reducer Right Hand - Perforated Type, When Viewed From The Large End, Has A Straight Side On The Left.

Our Product Design Allows The Cable To Route Properly And Chamfer Of Bend Take Care Of Cable Not To Worn Out,Peel Off Or Get Damage While Laying Of Cable.

Reducer Right Hand - Perforated Type Can Be Manufactured In Hot Dip Galvanized Finish(Galvanizing As Per Is-2626),Pre-Galvanized Finish(Material As Per Is-277),Powder Coating Finish(Powder Coating As Per Is-101),Stainless Steel Grade-As Per 316 , 304 & In Aluminium-Commercial Grade Finish.

Height Of Reducer Right Hand - Perforated Type Is Varies From 25,35,50,70,75,100 & 125 Mm ,Width Of Reducer Right Hand - Perforated Type Is Varies From 100 To 1000 Mm ,Thickness Of Reducer Right Hand - Perforated Type Ranging From 10,12,14,16,18 Swg, I.E 3,2.5,2,1.6,1.2 Mm

Ask For Technical Drawing (Dwg.No: -UEF-STD-011)

Our Valuable Clients